Simpson Strong-Tie FPBB44 696-2303XFPK4 4X4 Retro-Fit E-Z Base, Black, 1 Each

Product Information

An innovative overlapping sleeve design encapsulates the post, helping to resist rotation around its base.

The E-Z Base is part of a Simpson Strong-Tie line of products designed to help make reinforcing fence posts simple and economical.

Due to this increased galvanized thickness these connectors would be expected to have a longer service life than standard galvanized connectors. com/p/reviews/Simpson-Strong-Tie-E-Z-Base-Black-Powder-Coated-Post-Base-for-4x4-Nominal-Lumber-FPBB44/100655350/2" on this server.

Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and other reproductive harm. Post bases do not provide adequate resistance to prevent rotation about the base and therefore are not recommended for non-top-supported installations such as fences or unbraced carports. AC/LCE/LPC Split Post Caps BC Light Post-to-Beam Caps CBTZ Concealed Connection System ECC/CC Bolt-On Column Caps ECCO/CCO Bolt-On Column Caps ECCQ/CCQ-SDS2.

or more may ship free depending on location, type of business and the type of Simpson products required. These products are not rated for uplift loads and should not be used with posts for overhead structures or any other structure that requires resistance to wind uplift loads.The E-Z base can be bolted to the concrete with four 1/2" anchors like a Simpson Strong Bolt 2 wedge anchor or Titen HD large diameter concrete screw . ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than the standard hot-dip galvanized coating (galvanized per ASTM A653 with a G90 coating). The E-Z Base is part of a Simpson Strong-Tie® line of products designed to help make reinforcing fence posts simple and economical. The Simpson Strong-Tie E-Z retrofit post base allows for easy installation of 4x4 wood posts on existing concrete. The E-Z Base and E-Z Spike products should not be used for solid fences in excess of 4' in height or that are unprotected from wind forces.

Additionally, the MPB44Z is available in ZMAX® as the standard finish to meet exposure conditions in many environments. Notwithstanding the terms of the Limited Warranty, Simpson Strong-Tie does not guarantee, represent or warrant that this product will prevent or reduce damage caused by corrosion, or any seismic, wind, atmospheric, or other load-producing event. Attach post to E-Z Base with (8) 1/4" Strong-Drive SDS Heavy-Duty Connector screws or 1/4" HDG lag screws. These products are not rated for uplift loads, and should not be used with posts for overhead structures or any other structure that requires resistance to wind uplift loads. Built-in standoff tabs provide the required 1" standoff to resist decay of the post while eliminating multiple parts and assembly.If your 4x4's are wet, the fit may be a LITTLE tight and require you to pound them into the brackets, but the dry ones only require a little nudging. com/p/Simpson-Strong-Tie-E-Z-Base-Black-Powder-Coated-Post-Base-for-4x4-Nominal-Lumber-FPBB44/100655350" on this server. ca/product/simpson-strong-tie-e-z-base-12-gauge-black-powder-coated-post-base-for-4x4/1000793054" on this server.