Y Screwdriver Set, 4Pcs Tri-Point Screwdrivers, U Fork Screwdriver Kit, Tri-Wing Screwdriver Set, Electronics Repair Tool Precision with Magnetic Multifunctional Screwdriver Hand Repair Tools

Product Information

The following are screw drives based on a cruciform shape; i.e., a cross shape. Other names for these types of drives are cross recessed, cross-head, cross tip, and cross-point. A double slotted screw drive is not considered cruciform because the shape is not recessed, and consists only of two superimposed simple milled slots. Some of these types are specified in ISO 4757, Cross recesses for screws.

Recessed head fastener and driver combination". Google Patents. 2015-12-11. Archived from the original on 2020-01-26 . Retrieved 2017-10-13. Magnetic Screwdriver: It is a standard screwdriver with a practical feature: The screws are held in place by a magnetized tip, making it simpler to install or remove the screws. Some screws have heads designed to accommodate more than one kind of driver, sometimes referred to as combo-head or combi-head. The most common of these are a combination of a slotted/Phillips head. When a Phillips Is Not a Phillips Plus So Much More!". Instructables. Archived from the original on 2021-06-08 . Retrieved 2021-09-23.

The Type II (Conical/Connie) design adds a conical cup that receives a centering pin on the driver, improving the alignment of the driving tool to the fastener recess. Reed & Prince Manufacturing Corporation: Welcome". Reedandprincemfg.com. Archived from the original on 2012-04-25 . Retrieved 2012-03-12. The knife manufacturer Microtech uses a variation of this with 3 round holes arranged in a triangle shape. The camera company Leica Camera has used versions of this on rewind knobs and other levers on their rangefinder cameras. [ citation needed] 12-spline flange [ edit ] Sizes are: M4, M5, M6, (M7), M8, (M9), M10, (M11), M12, (M13), M14, (M15), M16, (M17) and M18 (the sizes in parentheses are less commonly used, but they do exist). Despite the similar naming scheme to metric fasteners, there is no correlation between the name of the size and the dimensions of the tool. Some sizes (at least M14, M16, M18) are also available in a tamperproof version (with a center hole)

The 12-spline flange screw drive has twelve splines in the fastener and tool. It consists of 12 equally spaced protrusions, each with a 60° angle. It is achieved overlaying 4 equilateral triangles, each one rotated 30° over the previous one. The spline drive was part of the obsolete, U.S-designed Optimum Metric Fastener System and was defined by ASTM B18.2.7.1M, which was withdrawn in 2011, [81] making the spline drive obsolescent. Digest, Reader's (2003). Family Handyman Best Projects, Tips and Tools. Reader's Digest. p.106. ISBN 978-0-7621-0455-0. Archived from the original on 2016-12-24 . Retrieved 2016-09-24.A correctly sized JIS driver will engage at full depth into a Phillips or Pozidriv head screw slightly loosely, but without damage. JIS heads are often identified by a single dot or an "X" to one side of the cross slot. [30] a b c d e Dougan, Lee. "Aerospace Drive System Finding New Applications". www.phillips-screw.com. Phillips Screw Company . Retrieved 21 September 2022. Combo drive". Klien Tools. 3 November 2014. Archived from the original on March 11, 2015 . Retrieved 1 July 2022.